On September 27th, SPV shipped two low bed semi-trailers to Chile.These semi-trailers were required 3 axles, they will be used to transport container in the port.

Related link:
Low Bed Semi-trailer: http://www.spv-vehicle.com/other-semi-trailer/low-bed-semi-trailer/

From Kazakhstan order, SPV will dispatch 4 units of water tank truck with pesticide spinkler on June 22th, 2011. These water tank trucks are truely muli-fuction. They could transport water, splash street, used for irrigation and control pest by using the pesticide sprinkler.

Related Link: 

Dongfeng 4,000 Litres Water Tank Truck: http://www.spv-vehicle.com/tank-truck/pesticide-sprayer-truck/pesticide-sprayer-truck-dongfeng-306.html

SPV shipped one unit of Sinotruk tractor head(6X4) and mated fuel tank semi-tailer to Kazakhstan on January 29th, 2011. As winter's temperature in Kazakhstan could be very cold, so this semi-trailer fuel tanker were equipped with heat preservation system, there were a heater equipped at rear of tank.

Related Link;

Heat preservation fuel tank semi-trailer: http://www.spv-vehicle.com/tanker-semi-trailer/fuel-tanker-semi-trailer/heat-preservation-oil-trailer-215.html

14 units of special vehicles under Japanese Grant passed Crown Agents inspection and were heading to Maputo, Mozambique
 
Project:
For Program for Emergent Water Supply For Addressing Climate Change in the Republic of Mozambique
Crown Agents’ Reference: BJ/MZE01/11236/011-01
 

Items:
 
A-4:  Water tank truck (for drinking water) 2 units
C-4.1: Cargo truck with crane (4 tons)  4 units
C-4.2: Cargo truck with crane (3 tons)  4 units
C-5:  Water tank truck (for industrial water) 2 units
C-6: Fuel tank truck 2 units
With spare parts for 2 years
All these trucks are 4X4 (all wheel drive) to suit rough roads in Mozambique.
 
After Crown Agents’ 3-day inspection at our factory, including road driving test, function operation test, loading capacity test, unit by unit, our vehicles are satisfactory and allowed to ship out to Maputo port, Mozambique. It will take around 40 days to arrive at destination port.
 
This shipment was valued around US$1,000,000. The payment term is 100% irrevocable Letter of Credit at sight. After shipment, full set of documents are submitted to Sumitomo Mitsui Bank, Tokyo, Japan for payment negotiation.
 
Cheers for our successful delivery of satisfactory products to end users.

A lot of special vehicles - 4X4 fuel tanker, potable water tanker, industrial water tanker, truck mounted cranes
are parked in orderliness on our factory yard

After inspection, 4X4 fuel tanker, potable water tanker, industrial water tanker, truck mounted cranes
are ready for shipment


4X4 fuel tanker, potable water tanker, industrial water tanker are ready for shipment
 

8 units of truck mounted crane is shipping to Mozambique




4x4 Truck Mounted Crane capacity test


4x4 Truck Mounted Crane outrigger test


Testing in Mozambique


On-site Training in Mozambique 01


On-site Training in Mozambique 02


On-site Training in Mozambique 03


On-site Training in Mozambique 04
 

14 units of special vehicles under Japanese Grant passed Crown Agents inspection and were heading to Maputo, Mozambique
 
Project:
For Program for Emergent Water Supply For Addressing Climate Change in the Republic of Mozambique
Crown Agents’ Reference: BJ/MZE01/11236/011-01
 

Items:
 
A-4:  Water tank truck (for drinking water) 2 units
C-4.1: Cargo truck with crane (4 tons)  4 units
C-4.2: Cargo truck with crane (3 tons)  4 units
C-5:  Water tank truck (for industrial water) 2 units
C-6: Fuel tank truck 2 units
With spare parts for 2 years
All these trucks are 4X4 (all wheel drive) to suit rough roads in Mozambique.
 
After Crown Agents’ 3-day inspection at our factory, including road driving test, function operation test, loading capacity test, unit by unit, our vehicles are satisfactory and allowed to ship out to Maputo port, Mozambique. It will take around 40 days to arrive at destination port.
 
This shipment was valued around US$1,000,000. The payment term is 100% irrevocable Letter of Credit at sight. After shipment, full set of documents are submitted to Sumitomo Mitsui Bank, Tokyo, Japan for payment negotiation.
 
Cheers for our successful delivery of satisfactory products to end users.

A lot of special vehicles - 4X4 fuel tanker, potable water tanker, industrial water tanker, truck mounted cranes
are parked in orderliness on our factory yard

After inspection, 4X4 fuel tanker, potable water tanker, industrial water tanker, truck mounted cranes
are ready for shipment


4X4 fuel tanker, potable water tanker, industrial water tanker are ready for shipment
 

8 units of truck mounted crane is shipping to Mozambique




4x4 Truck Mounted Crane capacity test


4x4 Truck Mounted Crane outrigger test


Testing in Mozambique


On-site Training in Mozambique 01


On-site Training in Mozambique 02


On-site Training in Mozambique 03


On-site Training in Mozambique 04
 

14 units of special vehicles under Japanese Grant passed Crown Agents inspection and were heading to Maputo, Mozambique
 
Project:
For Program for Emergent Water Supply For Addressing Climate Change in the Republic of Mozambique
Crown Agents’ Reference: BJ/MZE01/11236/011-01
 

Items:
 
A-4:  Water tank truck (for drinking water) 2 units
C-4.1: Cargo truck with crane (4 tons)  4 units
C-4.2: Cargo truck with crane (3 tons)  4 units
C-5:  Water tank truck (for industrial water) 2 units
C-6: Fuel tank truck 2 units
With spare parts for 2 years
All these trucks are 4X4 (all wheel drive) to suit rough roads in Mozambique.
 
After Crown Agents’ 3-day inspection at our factory, including road driving test, function operation test, loading capacity test, unit by unit, our vehicles are satisfactory and allowed to ship out to Maputo port, Mozambique. It will take around 40 days to arrive at destination port.
 
This shipment was valued around US$1,000,000. The payment term is 100% irrevocable Letter of Credit at sight. After shipment, full set of documents are submitted to Sumitomo Mitsui Bank, Tokyo, Japan for payment negotiation.
 
Cheers for our successful delivery of satisfactory products to end users.

A lot of special vehicles - 4X4 fuel tanker, potable water tanker, industrial water tanker, truck mounted cranes
are parked in orderliness on our factory yard

After inspection, 4X4 fuel tanker, potable water tanker, industrial water tanker, truck mounted cranes
are ready for shipment


4X4 fuel tanker, potable water tanker, industrial water tanker are ready for shipment
 

8 units of truck mounted crane is shipping to Mozambique




4x4 Truck Mounted Crane capacity test


4x4 Truck Mounted Crane outrigger test


Testing in Mozambique


On-site Training in Mozambique 01


On-site Training in Mozambique 02


On-site Training in Mozambique 03


On-site Training in Mozambique 04
 

SPV shipped one unit of Sinotruk tractor head(6X4) and mated fuel tank semi-tailer to Kazakhstan on January 29th, 2011. As winter's temperature in Kazakhstan could be very cold, so this semi-trailer fuel tanker were equipped with heat preservation system, there were a heater equipped at rear of tank.

Related Link;

Heat preservation fuel tank semi-trailer: http://www.spv-vehicle.com/tanker-semi-trailer/fuel-tanker-semi-trailer/heat-preservation-oil-trailer-215.html

These 3 units of sewage vacuum tankers are for a Middle East Country. The chassis is one of the best heavy duty truck brand - Dongfeng, with Cummins 260Hp engine. The top tank is made of mild steel, capacity 14,000liters, with inner baffles strengthened, anti-corrosive interior treatment. It is ideal vehicle to vacuum suck, transport, discharge of sewage waters.

Related Link: 

14,000 Litres Dongfeng Kingland Sewage Vacuum Truck: http://www.spv-vehicle.com/sanitary-truck/sewage-vacuum-truck/sewer-truck-dongfeng-130.html

After the first 2 units of 6,000 litres ISUZU refueling trucks shipped to Jordan, 20days later, another 9,000liters capacity of refuelingtruck is ready to load from Tianjin port, China, heading to Aqaba port, Jordan. The chassis is of ISUZU 700P series, carrying ISUZU Euro III 175 Hp engine. The tank is with 9,000 liters capacity with refueling machine equipped in the front of the tank. It can be used for mobile refueling.

Front view of ISUZU fuel tank truck (9,000 liters)


Front left view of ISUZU fuel tank truck (9,000 liters)


Rear right view of ISUZU fuel tank truck (9,000 liters)


Rear view of ISUZU fuel tank truck (9,000 liters)

Related links:

ISUZU fuel tank truck (10,000 Liters):  http://www.spv-vehicle.com/tank-truck/fuel-tanker-truck/refueler-truck-isuzu-61.html

Similar Keywords: fuel bowser, fuel tank truck, fuel dispensing truck, fuel tanker, fuel transport truck, fuel refueling truck, diesel tanker, aircraft refueling truc, petroleum tanker, oil transport truck.

These 4 concrete mixer trucks are loaded on bulk vessel in Oct.2010, shipping out from Shanghai port, China to Chittagong port, Bangladesh. They are of right hand drive, with HINO 325hp engine. The 3 main components for top superstructurer - Hydraulic motor, decelerator, hydraulic pump are of Italian imported brand.

Related Link: 

CAMC Concrete Mixter Truck(10,000 Litres) : http://www.spv-vehicle.com/construction-truck/concrete-mixer-truck/construction-vehicle-camc-183.html

We shipped out 2 units of fuel tank trucks (6,000 Liters) heading to Jordan today. These fuel tank trucks are made with famous ISUZU chassis, which is from joint venture of ISUZU and China. Due to ISUZU Japan mainly produces right hand drive chassis in Japan, aiming at substantial Chinese market, ISUZU built a joint venture in China many years ago to produce left hand drive chasis conforming to China laws. These chassis are of light truck series 600P, carrying ISUZU engine 95HP (horse power) and ISUZU gear box (5-forward, 1-reverse). ISUZU high quality ensures 1,000,000 KM no overhaul.

2 units of ISUZU fuel tankers are leaving our factory soon to deliver to Shanghai port

Our superstructure fuel tank is of 6,000 lites capacity, with powerful pump equipped, very convenient for fuel pump in and out. For all exporting fuel tankers, we equip them with European type manhole and emergent bottom valve to ensure fuel no leakage out in case of accident occurs. Clients are very satisfied with these vehicles after inspection and allowed shipment.

 
Rear left view of ISUZU fuel tankers (6,000 liters)


Rear right view of ISUZU fuel tankers (6,000 liters)

Ralated Links:

ISUZU fuel bowser (6,000 liters): http://www.spv-vehicle.com/tank-truck/fuel-tanker-truck/fuel-tanker-isuzu-71.html

Similar Keywords: fuel bowser, fuel tank truck, fuel dispensing truck, fuel tanker, fuel transport truck, fuel refueling truck, diesel tanker, aircraft refueling truc, petroleum tanker, oil transport truck.

SPV finished an order from Qatar about 2 units of Aerial Platform Trucks on January 3, 2010. And before the shippment, customer went to our factory for inspection. By visiting our factory and inspecting the products, customer was very satisfied with these two units of aerial platform trucks. He said SPV was the best factory he saw and he was moved by our professional work team.

Related link: 

Dongfeng 24 meters aerial platform truck: http://www.spv-vehicle.com/civic-utility-truck/aerial-platform-truck/

SPV finished an order of asphalt semitrailer for Trinidad on July 3, 2009. It was a two axles semi-trailer with heat preservation system to keep the liquid state of asphalt.

Related Link: 

Asphalt tank semitrailer: http://www.spv-vehicle.com/tanker-semi-trailer/asphalt-semi-trailer/

In 2007, we have shipped 15 units of dumper trucks to Congo for a construction company. The chassis is one of the best heavy-duty chassis in China - Shacman. It is 6X4, with most famous Chinese Weichai engine, FAST gear box, and Hande axles, very powerful and strong chassis. The dump box is U-shape box with thick material of side and bottom boards. The hydraulic systems are of Jiaheng brand - Chinese top hydraulic supplier. It is reliable as Hyva, but cheaper cost.

Dump Truck Shacman (U-shape dumper) for Congo : parking on the factory yard


Dump Truck Shacman (U-shape dumper) for Congo: parking on the factory yard


Front View of Dump Truck Shacman (U-shape dumper) to Congo


Front Right View of Dump Truck Shacman (U-shape dumper) to Congo

Front Left View of Dump Truck Shacman (U-shape dumper) to Congo
 

Side view of dump truck Shacman (U-shape dumper) for Congo - lifted


Side view of dump truck Shacman (U-shape dumper) for Congo
Dump truck Shacman (U-shape dumper) for Congo: on the vessel


Dump truck Shacman (U-shape dumper) for Congo: being lifted onto bulk vessel